 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Photoelectrics Type EF 1801 Fiber Optic Sensor * * * * * * * * * * Range: Fiber dependent, typ. 100 mm Adjustable sensitivity Modulated, red light Rated operational voltage: 10 to 40 VDC Output: DC 200 mA NPN or PNP Make and break switching function, LED indication Heavy duty M18 metal housing, IP 67 Cable and plug versions For 2.2 mm fiber cable with 1 mm core MB 18 A for DIN-rail mounting (see Accessories) Product Description Used in through-beam, retroreflective or diffuse-reflective applications depending upon how the additional fibers are mounted. Easily adjustable sensitivity with 270 potentiometer. LED indication for output ON. Short M18 metal housing for heavy duty applications. The fiber allows positioning and mounting in tight spaces with the photoelectric sensor itself mounted in a more convenient location. Ordering Key Type Housing diameter Range Output type Housing material Connection type EF 18 01 PPA S - 1 Type Selection Housing diameter M18 Rated operating dist. (Sn) Fiber depend. Ordering no. NPN/cable Make & break swit. EF 1801 NPAS Ordering no. NPN/plug Make & break swit. EF 1801 NPAS-1 Ordering no. PNP/cable Make & break swit. EF 1801 PPAS Ordering no. PNP/plug Make & break swit. EF 1801 PPAS-1 Specifications Rated operating dist. (Sn) Temperature drift Hysteresis (H) (Differential travel) Rated operational volt. (UB) Ripple (Urpp) Output current Continuous (Ie) Short-time (I) No load supply current (IO) Min. load current (Im) OFF-state current (Ir) Voltage drop (Ud) Protection Transient voltage Sensitivity Light source Light type Fiber dependent 0.4%/K 3 to 20% 10 to 40 VDC (ripple included) 10% 200 mA 200 mA, max. load capacity 100 nF 20 mA, 0.5 mA 100 A 2.5 V Reverse polarity, short circuit, transients Max. 1 kV/0.5 J Adjustable, 270 turn potentiometer, 660 nm Red, modulated, synchronized Operating frequency (f) Response time OFF-ON (tON) ON-OFF (tOFF) Power ON delay (tV) Indication Output ON Environment Overvoltage category Pollution degree Degree of protection Temperature Operating Storage Vibration Shock Dielectric voltage Housing material Body Front Cable end Nuts 120 Hz, light/dark ratio 1:2 3.2 ms 5 ms Typ. 100 ms LED, yellow III (IEC 60664/664A; 60947-1) 3 (IEC 60664/664A; 60947-1) IP 67 (IEC 60529; 60947-1) -20 to +60C (-4 to 140F) -30 to + 70C (-22 to 158F) 10 to 150 Hz, 0.5 mm/7.5 g (IEC 60068-2-6) 2 x 1 m & 100 x 0.5 m (IEC 60068-2-32) 500 VAC (rms) Nickel-plated brass TPE/POM, black Polyester, black Nickel-plated brass Specifications are subject to change without notice (06.03.2006) 1 EF 1801 Specifications (cont.) Connection Cable Grey, 2 m, oilproof PVC, 4 x 0.35 mm2 Note: Other cable lengths on request M12 CONH1A-. serie 115 g 40 g Yes Dimensions Plug (-1) Cables for plug (-1) Weight Cable version Plug version CE-marking EF 1801 .PAS EF 1801 .PAS-1 Operation Diagram Power supply Object present, light received Output ON: Make switching (NO) BK (4) Break switching (NC) WH(2) Tv Tv Truth Table Make switching Object present DC types LED Load Output NPN Output PNP OFF ON OFF ON No Yes Break switching No Yes Wiring Diagrams 1 BN 4 BK 2 WH Non-active Active High Low Low High Active Non-active Low High High Low 3 BU 1 BN PPAS 2 WH 4 BK 3 BU NPAS Accessories * Fiber optics - call for further information * Connector type CON.1A../CON.14NF.. series Please refer to "Accessories" Delivery Contents * Photoelectric switch: EF 1801.... * 2 nuts * M18 mounting bracket MB 18A for direct surface or DIN-rail mounting * Screw driver * Fiber cutter * Packaging: cardboard box 2 Specifications are subject to change without notice (06.03.2006) EF 1801 Installation Hints When you insert the fibers: * Push the spring-loaded clamp (1) with the enclosed screw driver towards the fiber entries (2). The fiber entries are now open for putting in the fibers. * Put in the fibers. Be sure that the fibers pass the constriction near the bottom of the hole. The constriction seals the junction (between fiber and photo element) against dust. The sensing distance will be reduced if there is an air gap between the fiber and the photo element. * Release the clamp to fix the fibers. 1 FIBER FIBER 2 FIBER FIBER ENTRY ENTRY TRANSMITTER TRANSMITTER OR RECEIVER ORRECEIVER 2 Installation Hints To avoid interference from inductive voltage/ current peaks, separate the prox. switch power cables from any other power cables, e.g. motor, contactor or solenoid cables Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier Incorrect Correct The cable should not be pulled A proximity switch should not serve as mechanical stop Any repetitive flexing of the cable should be avoided Specifications are subject to change without notice (06.03.2006) 3 |
Price & Availability of EF1801PPAS-1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |